Product description PLA+ is an environmentally friendly plant-based plastic material and is the most common raw material for 3D printing. Using PLA + ensures easy printing and without problems and distortions. The material adheres perfectly to the printing surface in the first layer whether the surface is heated or not. +PLA is not a toxic material and is almost completely odorless. It is strong, durable and does not shrink or warp during printing. The roll comes packed in a reusable vacuum bag. The raw materials of the Biqu company are arranged in a clean and orderly roll of the material that ensures smooth and problem-free printing. Uniformity in the diameter of the material with a deviation of up to -0.03 mm allows for comfortable printing without deviations and without problems in the flow of the material. Technical specifications: Roll diameter: 1.75 mm Roll weight: 1 kg net Diameter accuracy: +0.03 mm Roll dimensions: 20x20x6.8 cm Recommended printing temperature: 190-220 degrees Celsius Printing temperature of Bed: 0-60 degrees Celsius Recommended print speed: 15-120 mm/s Roll length: about 340 meters
Printing Temperature:
195-220 degrees to the top of the printer (this).
Work surface temperature - 60 degrees.
Dispensing temperature:
- 210 - 210 degrees, when the grout is not steel (less good thermal conduction) as well as 10 degrees.
For a very large product (about 100 hours of printing) it is recommended to add glue and reduce the heat of the bed.
Fans: 100%.
Note :
Setting temperature data can vary depending on environmental data, material types, printer quality, and so on.